The Reliability of Wireless Condition Monitoring in Cold Weather
The Superior Reliability of Wireless Condition Monitoring in Extreme Cold Weather.
Winter weather conditions increase the pressures faced by rail operators responsible for ensuring the safety and reliability of track infrastructure. It is vital to ensure that systems providing infrastructure condition data are not interrupted by cold temperatures and snowfall because they are relied on to detect problems and target maintenance.
Even the most well-established methods can be compromised by winter conditions – sending out track inspectors is less productive when daylight hours are short and the ground is masked by snow cover. Nobody relishes the task of manually logging data from geotechnical monitoring instruments such as borehole inclinometers (IPIs), extensometers and piezometers in the depths of winter. And methods such as automated total stations (AMTS), that are often relied on to detect changes in track alignment, depend on optical sensors that cannot work without clear line of sight to reflective prism targets fixed at points of interest such as track ties. Even a modest blanket of snow can render them ineffective and necessitate significant maintenance effort to clear the track. Monitoring systems that depend on wires are always prone to damage caused by maintenance operations, but are particularly vulnerable when they cannot be seen due to snow cover.
It is therefore no surprise that rail engineers have welcomed the emergence of wireless remote monitoring technology which delivers precise, continuous data throughout harsh winter conditions.
Wireless Monitoring in Extreme Cold Weather
Wireless remote monitoring systems use various types of sensor to gather data related to movement and a range of structural and geotechnical parameters. Attractions of the technology include the capability to detect changes in track geometry using tilt sensors, with outputs including cant, twist and settlement data with levels of temporal and spatial sampling that cannot be matched by other methods. The versatility of the wireless communications platform is a further attraction. Innovations such as Senceive’s range of interface nodes mean that data from many third-party sensors can be logged automatically. So, even when weather conditions prevent going to site for manual logging, your team can be kept informed with near-continuous updates from remote and challenging sites.
Winter conditions can increase the risk of damage to rail infrastructure – particularly where track is dependent on the stability of slopes, such as man-made embankments and cuttings and natural hillsides. Flooding can cause scour and slope erosion, and rainfall and snowmelt can trigger landslides, debris flows and rockfall. Monitoring will not prevent these events, but it can provide early warning, often before the railway has been damaged. The InfraGuard responsive monitoring solution developed by engineers at Senceive and Network Rail, the UK rail infrastructure owner, combines smart tilt sensors and cameras with a wireless communications system that provides multiple levels of alert relating to the severity of sudden events such as landslides and rockfalls. It is used by rail operators around the world to monitor many miles of at-risk track, significantly reducing the impact of dangerous and disruptive slope failures through winter conditions.
Monitoring in cold weather is not without challenges – whatever the technology. Wireless remote monitoring solutions depend on solar panels to power communications gateways and it is essential to factor-in how many hours of daylight you can expect mid-winter to ensure that the size and orientation of panels is optimized for uninterrupted performance. They also depend on batteries, both in the sensors and the gateway, so the cold-related reduction in battery-life must also be modelled in advance. And finally, the performance of the MEMS-based sensors at the heart of every tilt sensor is affected by temperature variations. That’s why Senceive tilt sensors all contain a dedicated temperature sensor, and calculations using our WebMonitor software include corrections to remove the influence of temperature variations on sensor accuracy. These lessons have all been learnt through years of development and trials and they emphasize that an effective monitoring solution is dependent on more than hardware and software – it is also reliant on the engineering expertise and support team backing up the technology. The Senceive team has been doing this since pioneering the technology nearly twenty years ago and provides unrivalled support.
Hardware deployed in such demanding conditions as found in the northern US states, Canada and Scandinavia must be able to deliver high levels of precision and repeatability throughout summer/winter temperature ranges of more than 60°C. Senceive tilt sensors are tested and certified to perform at temperatures as low as -40°C.
Summit Infrastructure, a prominent provider of rail monitoring solutions with projects across Canada, has demonstrated the adaptability of wireless sensors in extreme cold weather. Their use of Senceive’s remote rail condition monitoring equipment enables uninterrupted monitoring of rail infrastructure as the sensors function effectively in temperatures as low as -40°C and even when traditional survey targets are buried beneath layers of snow. This provides project resilience that was not previously available.
Case Study: Follobanen Trackbed Monitoring
The reliability of wireless sensors in cold weather is demonstrated in the case of the Follobanen project. This extensive railway construction project in Norway involved the deployment of wireless condition monitoring sensors by specialists at Cautus Geo in order to monitor the trackbed and a nearby sky station building. The wireless solution reduced the need for site visits and continued to function through cold and snowy conditions that would have compromised the effectiveness of traditional monitoring techniques. The data collected not only met the project’s accuracy requirements but also exceeded expectations.
Reliability in Snow-Covered Environments
The Minneapolis Light Rail Transit System Extension project, performed with Terracon, demonstrates the effectiveness of wireless sensors in snow-covered conditions. The wireless monitoring system not only endured the snowfall but also provided precise and timely data, ensuring the safety and efficiency of the rail transit system.
In conclusion, wireless condition monitoring technology has transformed railway infrastructure monitoring, offering reliability, precision and continuous data in extreme cold weather and snow-covered environments. Able to withstand temperatures as low as -40°C and to operate where traditional survey targets may be buried in snow and ice, it provides uninterrupted monitoring in the harshest conditions. The case studies above showcase the real-world success of wireless condition monitoring in some of the most challenging environments worldwide.
As rail operators seek to enhance safety and reliability, embracing wireless condition monitoring sensors is a smart choice, providing accurate, real-time data and peace of mind, even in the most unforgiving weather conditions.